eduEnter

William White William White

0 Khóa học đã đăng ký • 0 Khóa học đã hoàn thành

Tiểu sử

NGFW-Engineer 100％시험패스덤프문제, NGFW-Engineer유효한공부문제

Itcertkr NGFW-Engineer 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=158UfQEN4ArG0nVzkRoMvPpQIbswWPWdz

근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Palo Alto Networks인증 NGFW-Engineer시험은 IT인증시험중 가장 인기있는 시험입니다. Itcertkr에서는 여러분이Palo Alto Networks인증 NGFW-Engineer시험을 한방에 패스하도록 실제시험문제에 대비한Palo Alto Networks인증 NGFW-Engineer덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.

Palo Alto Networks NGFW-Engineer 시험요강:

주제
소개

주제 1

PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.

주제 2

Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.

주제 3

PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active
active and active
passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.

>> NGFW-Engineer 100％시험패스 덤프문제 <<

NGFW-Engineer유효한 공부문제 - NGFW-Engineer최신 인증시험 기출문제

Palo Alto Networks인증 NGFW-Engineer시험패스는 고객님의 IT업계종사자로서의 전환점이 될수 있습니다.자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. Itcertkr의 Palo Alto Networks인증 NGFW-Engineer덤프는 시장에서 가장 최신버전으로서 시험패스를 보장해드립니다.

최신 Network Security Administrator NGFW-Engineer 무료샘플문제 (Q16-Q21):

질문 # 16
Which two statements describe an external zone in the context of virtual systems (VSYS) on a Palo Alto Networks firewall? (Choose two.)

A. It is associated with an interface within a VSYS of a firewall.
B. It is not associated with an interface; it is associated with a VSYS itself.
C. It is a security object associated with a specific VSYS.
D. It is a security object associated with a specific virtual router of a VSYS.

정답：A,C

설명：
In the context of virtual systems (VSYS) on a Palo Alto Networks firewall, the external zone is typically associated with specific interfaces within a VSYS. Zones are fundamental security objects used to define traffic flow between interfaces, and the external zone would be used for interfaces that connect to external networks.
An external zone is associated with an interface within a VSYS of the firewall. This ensures that traffic from specific interfaces can be classified as belonging to the external zone, allowing the firewall to apply appropriate security policies.
The external zone is indeed a security object that is specific to a given VSYS, as each VSYS can have its own set of zones that are isolated from others.

질문 # 17
Which two zone types are valid when configuring a new security zone? (Choose two.)

A. Virtual Wire
B. Tunnel
C. Internal
D. Intrazone

정답：A,B

설명：
When configuring a new security zone on a Palo Alto Networks firewall, the two valid zone types are:
Tunnel: A Tunnel zone is used for traffic that is associated with a VPN tunnel, such as IPSec tunnels. Traffic passing through a tunnel interface is classified into this zone.
Virtual Wire: A Virtual Wire zone is used when a firewall operates in transparent mode (also known as Layer 2 mode). In this configuration, the firewall can inspect traffic without modifying the IP address structure of the network.

질문 # 18
Which statement applies to the relationship between Panorama-pushed Security policy and local firewall Security policy?

A. Local firewall rules are evaluated after Panorama pre-rules and before Panorama post-rules.
B. Panorama post-rules can be configured to be evaluated before local firewall policy for the purpose of troubleshooting.
C. The order of policy evaluation can be configured differently in different device groups.
D. When a policy match is found in a local firewall policy, if any Panorama shared post-rule is configured, it will still be evaluated.

정답：A

설명：
Local firewall rules are evaluated after Panorama pre-rules (those applied before the firewall's local policies) and before Panorama post-rules (those applied after the firewall's local policies). This ensures that the local firewall rules do not override the central Panorama policy and are only applied in the appropriate order within the policy evaluation sequence.

질문 # 19
Which CLI command is used to configure the management interface as a DHCP client?

A. set deviceconfig system type dhcp-client
B. set network dhcp interface management
C. set deviceconfig management type dhcp-client
D. set network dhcp type management-interface

정답：C

설명：
To configure the management interface as a DHCP client on a Palo Alto Networks NGFW, the correct CLI command is set deviceconfig management type dhcp-client.
This command configures the management interface to obtain an IP address dynamically using DHCP.

질문 # 20
What must be configured before a firewall administrator can define policy rules based on users and groups?

A. Authentication profile
B. User Mapping profile
C. LDAP Server profile
D. Group mapping settings

정답：D

설명：
Before a firewall administrator can define policy rules based on users and groups, the Group Mapping settings must be configured. These settings enable the firewall to map users to their respective Active Directory (AD) groups. This mapping allows the firewall to use user and group information to create policy rules based on group membership.

질문 # 21
......

Itcertkr의Palo Alto Networks인증 NGFW-Engineer덤프는 몇십년간 IT업계에 종사한 전문가들이Palo Alto Networks인증 NGFW-Engineer 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. Palo Alto Networks인증 NGFW-Engineer덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. Itcertkr의Palo Alto Networks인증 NGFW-Engineer덤프는 Palo Alto Networks인증 NGFW-Engineer시험패스의 특효약입니다.

NGFW-Engineer유효한 공부문제: https://www.itcertkr.com/NGFW-Engineer_exam.html

그 외, Itcertkr NGFW-Engineer 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=158UfQEN4ArG0nVzkRoMvPpQIbswWPWdz

William White William White

Tiểu sử

Đăng nhập